Network-object 192.168.205.0 255.255.255.0Īccess-list do_not_nat extended permit ip object-group CVEC_LAN object-group mpls-networkĪccess-list mpls-network_access_in extended permit ip object-group mpls-network 192.168.212.0 255.255.255.0Īccess-list mpls-network_access_in extended permit ip any anyĪccess-list mpls_nat_to_inet extended permit ip object-group mpls-network any Last input never, output 00:00:00, output hang neverĥ minute input rate 39000 bits/sec, 28 packets/secĥ minute output rate 156000 bits/sec, 26 packets/secĢ393405002 packets input, 432646764629 bytes, 0 no bufferĠ input errors, 0 CRC, 0 frame, 0 overrun, 0 ignoredĠ watchdog, 89875 multicast, 0 pause inputĢ627809906 packets output, 1554804390704 bytes, 0 underruns Hardware is Fast Ethernet, address is 593 (bia 593) Input queue: 0/75/0/0 (size/max/drops/flushes) Total output drops: 0ĥ minute input rate 160000 bits/sec, 27 packets/secĥ minute output rate 41000 bits/sec, 30 packets/secĢ518664765 packets input, 1562467033113 bytes, 0 no bufferġ input errors, 1 CRC, 0 frame, 0 overrun, 0 ignoredĠ input packets with dribble condition detectedĢ505439140 packets output, 450651056027 bytes, 0 underrunsĠ output errors, 0 collisions, 3 interface resetsĠ lost carrier, 0 no carrier, 0 PAUSE outputĠ output buffer failures, 0 output buffers swapped outįastEthernet0/19 is up, line protocol is up (connected) Last clearing of "show interface" counters never Last input never, output 00:00:01, output hang never Input flow-control is off, output flow-control is unsupported Hardware is Fast Ethernet, address is 58f (bia 58f) I could draw one with AutoCAD, I don't have a diagram program.įastEthernet0/15 is up, line protocol is up (connected) The trunk is FastEthernet0/15 and VLAN 104 is FastEthernet0/19. Here is the output for "show int" on the switch for the ports involved.
0 kommentar(er)
